Search

The RailBoss from Trak-Star is the world's most powerful and reliable  4-stroke Gas Powered Rail Drill. The drill incorporates a two-speed gearbox for using either the Black or Carbide Twister Bits. The 150 RPM  range is for the Black Twister Bits or the 350 RPM range is for the  Carbide Twister Bits. By using the RB2SPD and the Carbide Twister Bits,  you can achieve up to 2-1/2 times the tool life in both standard and extremely hard rail. The drill features a smaller overall footprint,  quill feed arbor with thru-the-tool coolant, a one-stroke ergonomic feed handle, and a 10 point clamping system. A center-balanced carrying handle and weighing in at only 49 lbs makes transporting the RailBoss a  breeze. Made in the USA.

Kit Includes  

• (3) bits 1 5/16
• template 3 1/2x6x6
• 5-gallon cutting fluid
• (2) cutting pilots 
• Shoes 115-119  & 132/136/141

The RailBoss from Trak-Star is the world's most powerful and reliable   4-stroke Gas Powered Rail Drill. The drill incorporates a two-speed gearbox for using either the Black or Carbide Twister Bits. The 150 RPM   range is for the Black Twister Bits or the 350 RPM range is for the   Carbide Twister Bits. By using the RB2SPD and the Carbide Twister Bits,   you can achieve up to 2-1/2 times the tool life in both standard and extremely hard rail. The drill features a smaller overall footprint,   quill feed arbor with thru-the-tool coolant, a one-stroke ergonomic feed handle, and a 10 point clamping system. A center-balanced carrying handle and weighing in at only 49 lbs makes transporting the RailBoss a   breeze. Made in the USA.

• Available in Kit Part No: 0042605 (Includes: 3 TiN Twister Bits, Template, Cutting Fluid, 2 Pilots & 2 Pair of Rail Shoes)

Put less work into your rail drilling with the Power Feed RailMaster Hydraulic Rail Drill. It can drill up to a 1-11/16" holes using the easy to install Twister Bits in standard rail in 28 seconds  and under 35 seconds in fully heat treated rail. The drill operates at 5  GPM and 2000 PSI with a 4 HP motor, while weighing just 48 lbs. The RailMaster provides high clamping forces, and is easy to carry and  operate by one person. A simple forward/reverse lever turns the quill  feed arbor on or off. Plus it has place holders for extra Twister Bits.  Clamps are available for drilling crane or girder rail.  Made in USA.

Kit Includes  

• 3 TiN Twister Bits (1 5/16")
• Template
• Cutting Fluid
• 2 Pilots & 2 Pair of Rail Shoes

Twister Disposable Rail Bits are the easy to change, long lasting cutter  from Trak-Star. Just insert the cutter and twist. The Twister Bit is  automatically held in place.

    Twister Bits come in two styles:

          • Gold coated for all around rail drilling

          • Black coated for better performance for fully heated rail

Available in 3/4" thru 1-11/16" diameters. These cutters are backwards  compatible. They can be used in older Trak-Star drills with their  flatted areas on the shanks.Twister Arbor Systems are standard on all  new Gas and Hydraulic Rail Drills. Retrofit Kits are also available for  older Trak-Star drills.  Made in USA.

Put less work into your rail drilling with the Power Feed RailMaster Hydraulic Rail Drill. It can drill up to a 1-11/16" holes  using the easy to install Twister Bits in standard rail in 28 seconds  and under 35 seconds in fully heat treated rail. The drill operates at 5  GPM and 2000 PSI with a 4 HP motor, while weighing just 48 lbs. The RailMaster provides high clamping forces, and is easy to carry and  operate by one person. A simple forward/reverse lever turns the quill  feed arbor on or off. Plus it has place holders for extra Twister Bits.  Clamps are available for drilling crane or girder rail.  Made in USA.

• Available in Kit Part No: 0042605 (Includes: 3 TiN Twister Bits, Template, Cutting Fluid, 2 Pilots & 2 Pair of Rail Shoes)

The power of the RD12 when used in conjunction with our exclusive indexable carbide tipped bits easily drills both hardened and standard rail with the same tool, which provides the lowest cost per hole available on the market.Lightweight aluminum construction provides ease of handling, loading, and unloading. Preset integrated water ports is used for accurate and continuous drill lubrication.  Water coolant eliminates the need to maintain and store costly oils or chemicals.  Automatic water shut-off is used when the spindle is retracted. This feature conserves water, thereby, reducing downtime required to refill the water tank.  Over-center clamp design provides quick and easy setup of tool on rail.  Automatic drill feed and spindle speed provide greater precision in drilling, tool rack for holding extra bits, and TorxTM driver provides greater operator convenience and speed in setting up the RD12 Rail Drill. Fast drilling speed at 40 seconds or less per hole increases daily production while reducing labor costs. Keyless chuck requires no tools to install or remove bits.

Kit includes

• 1) RD12101 Rail Drill w/ Coolant Bottle
• 1) 29461 1-5/16" Chuck Bit
• 1) 29469 1-1/8" Chuck Bit
• 1) 29467 1-1/4" Chuck Bit
• 1) 32510 1-1/2" Chuck Bit
• 1) 29468 1-3/16" Chuck Bit
• 1) 31969 Ten Piece Carbide Insert Kit
• 1) 31986 131/132/136 RE Set of Rail Shoes
• 1) 31987 133 RE Set of Rail Shoes
• 1) 31984 90 RA Set of Rail Shoes
• 1) 31985 115/119 RE Set of Rail Shoes
• 1) 22625 Joint Bar Template

The power of the RD12 when used in conjunction with our exclusive indexable carbide tipped bits easily drills both hardened and standard rail with the same tool, which provides the lowest cost per hole available on the market.

• Lightweight aluminum construction provides ease of handling, loading, and unloading. Preset integrated water ports is used for accurate and continuous drill lubrication.  
• Water coolant eliminates the need to maintain and store costly oils or chemicals.  Automatic water shut-off is used when the spindle is retracted. This feature conserves water, thereby, reducing downtime required to refill the water tank.  
• Over-center clamp design provides quick and easy setup of tool on rail.  
• Automatic drill feed and spindle speed provide greater precision in drilling, tool rack for holding extra bits, and TorxTM driver provides greater operator convenience and speed in setting up the RD12 Rail Drill. 
• Fast drilling speed at 40 seconds or less per hole increases daily production while reducing labor costs. Keyless chuck requires no tools to install or remove bits.

RD-12 Carbide insert kit for Stanley rail drill

Fast Drilling and Superior Hole Quality

The Racine Rotamag Rail Drill with the Rotamag Cutter can drill up to 70 holes in 132 lb. standard carbon rail. Each hole takes less than 20 seconds to drill. The integral arbor support guarantees hole tolerance. Superior clamp design and custom rail shoes reduce the risk of drill movement during operation causing cutter breakage. It can easily drill through raised rail web lettering without breakage, a common problem with the competition.

Powerful and Lightweight

The 10 GPM @ 2,000 PSI hydraulic motor provides optimum speed (250 RPM) for quick drilling of holes. At 53 lbs., it is one of the lightest hydraulic rail drills on the market. Flat-faced couplers are hard plumbed at the top of the unit for easy connections.

Drill Accessories

Durable metal carry case, tool kit, and coolant bottle are included with every drill. Index bars and rail shoes available for most railroad and crane rail profiles. Convenient storage compartment on the side of drill for rail cutters.

Fast Drilling and Superior Hole Quality

The Racine Rotamag Rail Drill with the Rotamag Cutter can drill up to 70 holes in 132 lb. standard carbon rail. Each hole takes less than 20 seconds to drill. The integral arbor support guarantees hole tolerance. Superior clamp design and custom rail shoes reduce the risk of drill movement during operation causing cutter breakage. It can easily drill through raised rail web lettering without breakage, a common problem with the competition.

No Mixing of Fuel and Oil

Powered by a 4-cycle 2.5 HP Honda engine. No mixing means less maintenance and repairs due to improper fuel/oil mix.

Lightweight

Weighing only 43 lbs., it is lighter than most gasoline and hydraulic rail drills

Drill Accessories

Durable metal carry case, tool kit and coolant bottle are included with every drill. Index bars and rail shoes available for most railroad and crane rail profiles. Able to drill 1" to 11/2" hole diameters. Convenient storage compartment on the side of drill for rail cutters.

• 2.5 Honda 4-Cycle 50 cc. Engine
• Drilling range: 1 to 11/2" hole diameter
• Included: pump bottle, and tool kit
• Weight: 43 lbs.
• Inquire on rail sizes and drilling index bars

Easy Handling

The light weight 99 lbs. (45 kg.) (dry and without options) of the Ultra-Drill makes it easy to maneuver into place by one or two men.

Versatility

The Ultra-Drill uses standard HSS flat-beaded bits or Cobalt tapered shank twist drill bits. Vertical hole centers can be determined by using the universal height adjustment or rail specific position blocks.

Drill Through Joint Bars

One of the few rail drills on the market that has enough shaft length to drill through joint bars.

Quick Set-up

The Ultra-Drill is capable of drilling from 80-lb. (36 kg.) to 175-lb. (79 kg.) (rail including crane rail) with optional attachments. The cam-locking clamp arm allows for quick and easy attachment to the rail.

Automatic Feed

The continuous automatic feed insures a smooth drilling action that produces a consistent hole through any rail and long bit life. The drill also has a high-ratio hand crank feed for quick retract and set-up.

Briggs & Stratton 6-HP, 4-stroke gasoline engine with integral throttle and choke control spindle and feed system utilizes all gear configuration. Spur type primary reduction set and worm-gear type spindle drive are oil-bathed in lightweight alloy case. Bit feed uses planetary reduction gear set with Acme thread feed screw utilizing over-torque protection. Feed is activated with a lever-type engagement clutch. Spindle speed is set at 100 RPM; feed is .005 inches per revolution.