Rail Drills

Fast Drilling and Superior Hole Quality

The Racine Rotamag Rail Drill with the Rotamag Cutter can drill up to 70 holes in 132 lb. standard carbon rail. Each hole takes less than 20 seconds to drill. The integral arbor support guarantees hole tolerance. Superior clamp design and custom rail shoes reduce the risk of drill movement during operation causing cutter breakage. It can easily drill through raised rail web lettering without breakage, a common problem with the competition.

No Mixing of Fuel and Oil

Powered by a 4-cycle 2.5 HP Honda engine. No mixing means less maintenance and repairs due to improper fuel/oil mix.

Lightweight

Weighing only 43 lbs., it is lighter than most gasoline and hydraulic rail drills

Drill Accessories

Durable metal carry case, tool kit and coolant bottle are included with every drill. Index bars and rail shoes available for most railroad and crane rail profiles. Able to drill 1" to 11/2" hole diameters. Convenient storage compartment on the side of drill for rail cutters.

• 2.5 Honda 4-Cycle 50 cc. Engine
• Drilling range: 1 to 11/2" hole diameter
• Included: pump bottle, and tool kit
• Weight: 43 lbs.
• Inquire on rail sizes and drilling index bars

The RailBoss from Trak-Star is the world's most powerful and reliable  4-stroke Gas Powered Rail Drill. The drill incorporates a two-speed gearbox for using either the Black or Carbide Twister Bits. The 150 RPM  range is for the Black Twister Bits or the 350 RPM range is for the  Carbide Twister Bits. By using the RB2SPD and the Carbide Twister Bits,  you can achieve up to 2-1/2 times the tool life in both standard and extremely hard rail. The drill features a smaller overall footprint,  quill feed arbor with thru-the-tool coolant, a one-stroke ergonomic feed handle, and a 10 point clamping system. A center-balanced carrying handle and weighing in at only 49 lbs makes transporting the RailBoss a  breeze. Made in the USA.

Kit Includes  

• (3) bits 1 5/16
• template 3 1/2x6x6
• 5-gallon cutting fluid
• (2) cutting pilots 
• Shoes 115-119  & 132/136/141

The RailBoss from Trak-Star is the world's most powerful and reliable   4-stroke Gas Powered Rail Drill. The drill incorporates a two-speed gearbox for using either the Black or Carbide Twister Bits. The 150 RPM   range is for the Black Twister Bits or the 350 RPM range is for the   Carbide Twister Bits. By using the RB2SPD and the Carbide Twister Bits,   you can achieve up to 2-1/2 times the tool life in both standard and extremely hard rail. The drill features a smaller overall footprint,   quill feed arbor with thru-the-tool coolant, a one-stroke ergonomic feed handle, and a 10 point clamping system. A center-balanced carrying handle and weighing in at only 49 lbs makes transporting the RailBoss a   breeze. Made in the USA.

• Available in Kit Part No: 0042605 (Includes: 3 TiN Twister Bits, Template, Cutting Fluid, 2 Pilots & 2 Pair of Rail Shoes)

Easy Handling

The light weight 99 lbs. (45 kg.) (dry and without options) of the Ultra-Drill makes it easy to maneuver into place by one or two men.

Versatility

The Ultra-Drill uses standard HSS flat-beaded bits or Cobalt tapered shank twist drill bits. Vertical hole centers can be determined by using the universal height adjustment or rail specific position blocks.

Drill Through Joint Bars

One of the few rail drills on the market that has enough shaft length to drill through joint bars.

Quick Set-up

The Ultra-Drill is capable of drilling from 80-lb. (36 kg.) to 175-lb. (79 kg.) (rail including crane rail) with optional attachments. The cam-locking clamp arm allows for quick and easy attachment to the rail.

Automatic Feed

The continuous automatic feed insures a smooth drilling action that produces a consistent hole through any rail and long bit life. The drill also has a high-ratio hand crank feed for quick retract and set-up.

Briggs & Stratton 6-HP, 4-stroke gasoline engine with integral throttle and choke control spindle and feed system utilizes all gear configuration. Spur type primary reduction set and worm-gear type spindle drive are oil-bathed in lightweight alloy case. Bit feed uses planetary reduction gear set with Acme thread feed screw utilizing over-torque protection. Feed is activated with a lever-type engagement clutch. Spindle speed is set at 100 RPM; feed is .005 inches per revolution.